Why Does My Left Click Stop Working Then Work Again When I Blow It

Acer laptops all user a touchpad mouse, and when information technology stops being responsive, it is usually a upshot of driver issues. If your touchpad is no longer responding, and you lot are having trouble with the left and right-click buttons, and then updating your drivers could solve the issue.

If, however, there is a hardware trouble, y'all will have to seek professional person assistance from qualified technicians. A mutual cause of touchpad failure is water damage. Whether you've spilled a beverage or had your laptop in a clammy room, h2o tin can affect the connections and sensors on your touchpad and return information technology useless. Before writing off your computer, try switching information technology off and leaving it to dry for one or two days.

To solve the problem with the software, try the following. You lot will need a USB or Bluetooth mouse in lodge to make these changes as your touchpad will non be working, or responding reliably.

Method 1: Enable with Your Keyboard

On many computer systems, you tin plow your touchpad on and off with your keyboard.

1. On most Acer laptops, you can press and hold the Fn key on your keyboard and then press either the F6 or F7 key.
2. If you can't find the F6 or F7 key, it should show a small illustration of a hand touching a touchpad.
3. Endeavor using your touchpad after using this key combination. If it doesn't work, move onto the next method.

Method 2: Replace the Battery

On some Acer systems that come with the Gemstone Blue Sound Controls, it is possible to reset information technology by removing and replacing the battery. Here's how to do it.

1. Brand sure that your laptop is switched on and has completely loaded the operating system.
2. Remove your laptop's charger.
3. Remove the battery out of your laptop.

   

   Unlocking the bombardment latches

4. Supervene upon the battery again, power the laptop on and meet if the touchpad has begun working once more.

Method iii: Updating Through the Acer Website

1. First of all, visit the official Acer website, which features all the necessary, and official, drivers and manuals for your device. Go to the post-obit link: https://www.acer.com/air conditioning/en/GB/content/drivers

2. On the commuter and manuals page, you will be asked to enter your serial number, SNID or model number. This will and so take yous to a page with appropriate drivers. If you practice not know your series number, you tin too cull the category, series, and model of your device. If you lot yet don't know this information, you can use the auto-detect feature. At the bottom of the screen, you will run across green text that reads 'machine-detect my device information'. Click that link and follow the on-screen instructions, and your model number will exist detected.

   

   Drivers Manual Page

3. On the next folio, after you lot take entered the necessary information, you will exist presented with Drivers, Documents, BIOS/Firmware downloads and more. Past pressing the 'Driver' drop-down menu, yous will exist presented with drivers, including a touchpad driver for Windows 7 and up.

Method 4: Updating Through Device Director

Device Director is a default app in Windows that allows you to control hardware that is within your estimator or continued to. Y'all tin utilise Device Manager to manage drivers and update faulty drivers.

1. Enter 'Device Manager' into the search function of the Windows taskbar. On Windows x, the search bar tin can be found past pressing the Cortana button. On Windows 7, 8 and 8.1, you can find the search bar by pressing the Kickoff button.

   

   Device Manager in Windows Search Box

2. In your Device Manager, you will see a long list of devices that are hooked upward to your device. Under 'Mice and Other Pointing Devices', you should find your Acer touchpad.
3. Right-click the Acer touchpad and click 'Update Driver Software'. This will take you to a window that automatically searches for the latest commuter software. If there is ane available, it will prompt you to download it.

Downloading the latest driver software will get rid of any potential problems that are causing the mouse issue.

Method five: Changing Touchpad Settings from Bios

In some cases, the error might exist triggered if the Acer Touchpad is prepare to use advanced configuration to run its drivers. Therefore, in this case, we will be disabling the Touchpad Advanced configuration and setting it to bones. In order to do that:

1. Restart your reckoner and before it boots up, press the "F1" or "Del" key to get into bios.
2. Using the "Correct" Arrow fundamental, navigate to the "Master" tab.
3. Apply the down arrow key to highlight the "Touchpad" option and printing "Enter".
4. Select the "Bones" option and relieve your changes.

   

   Selecting Basic

5. Boot into Windows and check to come across if the outcome persists.

Method half dozen: Enabling Touchpad

In some cases, the touchpad might have been disabled either partially or entirely from the control panel. Therefore, in this footstep, we will be enabling it again and check if it works. In lodge to do that:

1. Printing "Windows" + "R" to open the run prompt.
2. Type in "Control" and press "Enter".

   

   Running Command Panel

3. Click on the "Hardware and Sound" option and select "Mouse and Touchpad".

   

   Open "Hardware and Sound"

4. Select the "Additional mouse settings" selection and click on your device.
5. Make certain that the device has been enabled.

Method 7: Changing Primary Button

In some cases, the outcome has reportedly been stock-still by changing the mouse button from the control panel temporarily and then irresolute it back to the left click. This triggers a change of mouse configuration and might help in getting rid of whatsoever glitches. In gild to do so:

1. Press "Windows" + "R" to open the run prompt.
2. Type in "Control" and press "Enter" to open up it.

   

   Accessing the Classic Control Panel interface

3. Within the Control panel, Click on "Hardware and Audio" and then select "Mouse" from the list.
4. Cheque the "Switch Master and Secondary Buttons" option.

   

   Checking the box

5. Click on "Apply" to salve your changes.
6. After a while, echo the process above and uncheck the push.
7. Cheque to see if the upshot persists.

Method 8: Cleaning Dirt

In some cases, sure dirt and foreign particles tin accumulate underneath the touchpad. Therefore, if your touchpad button is carve up from the touchpad (On some laptops the touchpad is uniform), insert a modest pin under the left-click and lift it up slightly. Take a can of compressed air and blow it underneath the click to wipe all foreign particles. Check to see if the issue is still there.

Kevin is a dynamic and self-motivated it professional, with a Thorough knowledge of all facets pertaining to network infrastructure blueprint, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and nether upkeep.

petersonancentim.blogspot.com

Source: https://appuals.com/fix-acer-touch-pad-left-click-not-working/

Share this post